Click for detailed imageORDERING INFORMATION
To protect modems, FAX machines,
telephones and other electronic equipment connected to a
standard telephone line (RJ-11 6-pin modular connector),
specify model TSS-200. To protect alarm systems, auto-dialers,
or other equipment that uses an 8-pin RJ-31X modular jack,
specify model TSS-201.
Optional 12" RJ-11 jumper cable is part
number TSS-200-CBL. Optional 12" RJ-31 jumper cable is part
number TSS-201-CBL.
|
The TSS-200 Telephone Line Surge Suppressor
is a very heavy duty surge suppressor designed to protect modem-based
equipment from damage by transients that appear on the phone line. The
TSS-200 is used by many investor-owned and municipal utilities to
protect telephone modems in electronic metering devices.
What distinguishes the TSS units from other
suppressors is our unique three-stage design. A very high speed
bi-directional SIDACTORTM works in combination with
MOVs and a three-element heavy-duty gas discharge tube to
provide a suppressor that has an extremely fast response time
yet can also dissipate large amounts of energy. Inter-stage
wirewound resistors provide better surge current handling than
competing carbon-film designs. Wide PC board traces and ground
planes provide additional surge handling capability. |
| MAXIMUM SPECIFICATIONS |
Surge Current
ANSI C62 (8 x 20μS) T-R, T-G, R-G | 20,000 Amps |
Energy Dissipation
10 x 1000μS pulses at 500 Amps | 2,000 Joules |
Instantaneous Clamping Voltage
Tip-Ring, Tip-Gnd, or Ring-Gnd | +/-300 Volts P-P |
Clamping Time | ~ 1 nanosecond |
In-circuit Series Resistence | 10 ohms |
Capacitance (Tip-Ring) | 50 pF |
Input/Output Jacks
Model TSS-200: USOC RJ-11 6-pin modular recptacles
Model TSS-201: USOC RJ-11 8-pin modular recptacles |
Ground Wire
18-inch AWG 16 stranded with 1/4-inch ring terminal |
Mounting
Double-sided adhesive square or screw mount |
Size: 2.75"W x 3.0"H x 1.4"D |
Enclosure: High-impact, injection-molded ABS plastic |
|
